Инструмент Cyclus Tools for tapping & facing bottom brackets shells T47 (720151)

Product technical specifications

Benefits:

You only need one tool for both work steps.

the change of the tool is eliminated

the guide results in exactly parallel milled housing sides. T47. It combines the advantages of BSA and large-volume bottom bracket shells with a diameter of 46 mm, e.g. PressFit 30, BBRIGHT PressFit, 386EVO, OSBB. By means of this cutter, the existing housings can be provided with a flat milled surface. Thus, analogous to BSA, bearing shells can be professionally screwed as usual.

The proper function of the cutter can only be guaranteed with metal. Furthermore, not every frame is suitable for this type of conversion. Please ask the respective manufacturer of the frame.

The proper function of the cutters can only be guaranteed with metal. Special attention must be paid to glued-in/laminated metal sleeves when cutting the thread, as these are exposed to high torsional forces. Furthermore, not every frame is suitable for this type of conversion. Please ask the respective manufacturer of the frame.

Please note: Letters or marks applied to the tool always refer to the tool itself. I.e. if an "R" is applied to one side, then this is a classic thread with the direction of rotation to the right clockwise. If an "L" is applied, the direction of rotation is to the left counterclockwise. It is not meant the application side with the bicycle, because there is no fixed reference system here!