Стойка-подставка для ремонта Cyclus Tools BikeLift S1 for 1 workplace without clamps (290401)

Product technical specifications

THE SOLUTION IN THE BICYCLE WORKSHOP

A 230 volt socket is all you require to lighten your load in the bicycle workshop. The electrically driven assembly stand makes work in the workshop easier, more ergonomic and, in its double version, also creates real space. It's great for creating a second workstation.

Our contribution to better ergonomics in the workshop follows the trend that bicycles gain more and more importance, especially in urban environments. There is something going on on the cycle paths and in the workshops as well. Cyclists who want to ride safely and smoothly for as long as possible should regularly hand their bike over an expert whose workshop is preferably just around the corner, in the middle of the pedestrian zone. On the one hand, a good order situation will result in certain waiting periods, on the other hand it requires fast and ergonomic workflows.

This is exactly where the bicycle lift comes in. The electrically driven mounting stand makes the work in the workshop easier and more ergonomic and, in addition, it makes space available when used in the double confi guration. The space saved can ideally be used for a second workstation.

MORE CONVENIENCE FOR REPAIR AND SERVICE

With our bicycle lift, we have developed a system that brings highly available, robust and precise industrial technology to the bicycle workshop. The solution makes work in service and repair noticeably more ergonomic and faster. With its set-up plates and optionally two mounting positions that can be lifted independently of each other, the BikeLift provides the necessary flexibility in your workshop.

PICK UP BICYCLES DIRECTLY FROM THE GROUND AND LIFT THEM TO ANY DESIRED WORKING HEIGHT

The BikeLift GDGT90 is an assembly stand that can be directly attached to a wall. Due to the fixed dowelling in the wall, the assembly stand is secure and stable.

Furthermore, we offer a bike lift that is equipped with one or two drive units, which allows independent work, because space is always limited, especially in workshops close to the city center. This flexible unit can also be set up or fixed to the workshop floor with it's secure base stand.

See the BikeLift GDGT90-S1 or GDGT90-S0 with the article numbers 290401 or 290402.

MORE COMFORTABLE REPAIR AND SERVICE

More comfort on the road, better ergonomics in the workshop. Everybody wants to ride a smoothrunning bike. With our bike lift, we have developed a system that provides bike workshops with highly available, robust and accurate industrial technology. This solution makes service and repair work noticeably faster and easier. With the mounting plates and optionally two independently liftable assembly stations, the BikeLift ensures the necessary flexibility in your workshop.

ALL FEATURES AT A GLANCE

for e-bikes, bicycles and cargo bikes

fl exible pick-up and holding systems

single and double workstations

low noise and little maintenance

space-saving due to compact design

highest reliability and operational safety

ergonomic and back-friendly

the drive is protected from water, grease and dust

modular mounting through the bottom plate, anchoring to the fl oor or wall

soft starts and stops thanks to frequency converter

hand or foot operatable switch

variable work height, lift height up to 2600 mm

safe freewheel system

installaton dimension, floor mounting WxDxH in mm: 300x300x2200

installinstallation dimension for free-standing WxDxH in mm: 600x600x2200

maximum lever load in kg: 85*

stepless height adjustment in mm: 2000**

total weight in kg: 80

*maximum useful lever load depends on accessories used (gripper, etc.)

**variable stroke on request

MOUNTING

1 Base plate Standard 00337 for GDGT 90 | 600 x 600 mm for fixed mounting and floor anchoring

2 Base plate Small 00338 for GDGT 90 | 300 x 300 mm for fixed mounting and floor anchoring

TO EACH HIS OWN TOOL

And so that everything also fits in the direction of the bicycle, the slide can be connected to different holding systems thanks to a wide variety of holes. Thanks to our adapter with Ш 50 mm, various gripping systems can be attached without difficulty. Thus, bicycle lift is easily adaptable, so that you can choose your preferred type of holding fixture.

HOLDING FIXTURES

1. Expansion cone for seat tube. Article-no. 003310

Further information: as of Ш 27mm

Load capacity: 35 Kg

2. Step mandrel-Set. Article-no. 003313

Further information: with 2 stepped pins

Load capacity: 85 Kg

3. 3-point holder. Article-no. 003319

Further information: / Load capacity: 35 kg

4. Bike gripper. Article-no. 00331

Further information: Feedback Sports

Load capacity: 35 Kg

5. Bike gripper. Article-no. 003312

Further information: VAR