0zł
Filter by
Categories
Price (min - max)
€ €
Manufacturers
more... less
Weight
kg kg
Part's size
more... less

Tools and keys

If you have a bike and want to repair it yourself, you can\'t do without special tools. From a set of wrenches to a special tool for a specific part of the bike.

Tools and keys online

If you have a bike and want to repair it yourself, you can't do without special tools. From a set of wrenches to a special tool for a specific part of the bike.

To ensure that your bike is always in good condition, it is not enough to just check it. Sometimes you need certain devices that give you a better idea of ​​its condition. In addition to the usual wrench, screwdriver and pliers, there are several tools that every cyclist needs.

Chain wear measuring tool

A worn chain can accelerate its breakage. If this happens while riding, it can damage more parts of the bike in the event of a fall, which is why worn chains are dangerous for every cyclist. To find out if your chain is in good condition, you should use a tool to measure its wear. It is important to buy one that measures the elongation of the chain, not just the distance between the teeth.

Wrench set

Wrenches come in different designs and no one denies that a cyclist must have them. The best set of wrenches is one that extends out like a pocket knife – that way they take up less space. The wrenches should be longer – short ones don’t always reach all the screws on your bike. The set should also include a universal wrench that allows you to loosen the hex bolt from any angle. You should also have wrenches with a curved handle.

Tool for pedals and crank bolts

This tool is convenient because you don’t have to pull out two different tools to properly tighten the crank or pedals. It is mainly used to make sure that the pedals are tightened correctly and that they don’t slip while you’re riding. You should check the nuts before riding with it. They are usually made of stainless steel.

Chain degreaser

Because the chain is so important to your bike, it has two tools. One of them is a degreaser. This tool helps to clean the chain better. This is necessary to ensure the chain works properly, as accumulated grease can interfere with its teeth. After cleaning the chain with a degreaser, don't forget to lubricate it with grease.

Spoke tensioning tool

Since spokes are usually of similar size, a special wrench was created for them - a spoke tensioning tool. They usually have three or four notches that are suitable for tightening the most common spokes (round, thickened, flat) to ensure the necessary pressure. Tightening spokes can be a difficult process, because if they are tightened incorrectly, the tire can fall off. Therefore, it is important to use the tool correctly.

Use these tools to keep your bike looking like new. If you take good care of your bike, you won't have to replace parts as often and it will last longer.

In the Bikko.bike bicycle store you will find a wide selection of bicycle tools. The products we sell are new, high-quality and stylish.

In the Bikko.bike online store – good prices every day!