Tire truing tools
To ensure that your bike is always in good condition, it\'s not enough to just check it. Sometimes you also need certain devices that give you a better idea of the condition of your bike.
Tool Cyclus Tools for spokes 3.3 / 3.4 / 3.6 / 4.4 / 5.0 / 5.2mm (720090)
Tool Cyclus Tools 20mm bolt through axle clamp for wheel truing stands (720129)
Tool Cyclus Tools nipple driver for electric drill with adjustable pin (720158)
Tool Cyclus Tools Top for spokes stainless steel 3.25/3.45mm (720517)
Tool Cyclus Tools thru axle adapter for truing stand 12-24mm 2 pcs. (720948)
Tool Cyclus Tools spoke thread rolling dies 1.80mm for 720265 (720266)
Tool Cyclus Tools spoke thread rolling dies for 720365 pair (720366)
Tool Cyclus Tools spoke thread rolling dies 2.00mm for 720048 (720261)
Tool Cyclus Tools spoke thread rolling dies 1.80mm for 720048 (720262)
Tool Cyclus Tools spoke thread rolling dies 2.00mm for 720265 (720267)
Tool Cyclus Tools spoke thread rolling dies 2.34mm for 720265 (720268)
Tool SRAM rear hub bearing press for X0/900/Rise/Roam/Rail 6903/63803D28
Tire truing tools online
Keeping your bike in good condition is not just about checking it. Sometimes you need certain tools that give you a better idea of the condition of your bike. In addition to the usual wrenches, screwdrivers, and pliers, there are several other tools that every cyclist needs.
Spoke Tightening Tool
Since spokes are generally of similar size, a special spoke wrench was developed for them - a tool designed to tighten spokes. They usually have three or four notches that are suitable for tightening the most common spokes (round, thick, flat) to ensure the necessary pressure. Tightening spokes can be a tricky process, because if you tighten them too hard, the tire can fall off. Therefore, it is important to use the tool correctly.
In the bicycle store Bikko.bike you will find a wide selection of service tools. The products we sell are new, high-quality and stylish.
In the Bikko.bike online store – good prices every day!