Tool Cyclus Tools for crank removal/installation M24x1/M10x1 (720244)

Cyclus Tools develops and produces top quality tools for professional bicycle repair shops, but of course it’s also appropriated for hobby technicians. Produced in Europe, these durable tools are permanently proofed by our quality checks. With furnitures for your workshop or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools offers solutions. Cyclus Tools counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for today’s fast changing conditions. When you have securely clamped the crank onto the axle by tightening and torquing the crank bolts, a specific crank puller tool is then needed to safely extract the crank arm from the axle. How is this done when the bottom bracket axle has no fitting conical surfaces, such as on e-bikes? In such a case (= threaded bottom bracket) you need some extra help, as the position of the crank is determined solely by screw connections and the standard removal method can no longer be applied. We have the solution: the new Cyclus crank puller, with a longer stroke extractor (more than 20mm)! The new Cyclus crank puller enables you to remove both older type and newer deeper cranks quickly, safely and professionally. To make the best use of CYCLUS TOOLS new crank puller, the following components are essential: crank internal thread M24x1 bottom bracket connection thread M10x1 Special note: with the help of the CYCLUS TOOLS milling cutter (art. 720235) you can first ream out defective crank threads (M22x1); and then cut a new M24x1 thread by using the CYCLUS TOOLS tap (and die: art. 720245). At the end of the job, you won't just dismantle the crank, but will even repair it as well. Your customer will greatly appreciate this service! Note: make sure you have got the Cyclus Tools fitting guides! Once you cut a new screw thread, you can use the fitting pullers from Cyclus Tools and thus pull off the crank as usual. Further CYCLUS TOOLS articles related to this bottom bracket system: 720234 - CYCLUS TOOLS crank puller | crank inside thread M24x1 - M15x1 bottom bracket connecting thread 720239 - CYCLUS TOOLS crank puller | crank inside thread M22x1 - M18x1 bottom bracket connecting thread | Cannondale BB30 720241 - CYCLUS TOOLS crank puller | crank inside thread M22x1 - M12x1 bottom bracket connecting thread 720242 - CYCLUS TOOLS crank puller | crank inside thread M24x1 - M12x1 bottom bracket connecting thread 720243 - CYCLUS TOOLS crank puller | crank inside thread M22x1 - M10x1 bottom bracket connecting thread 720244 - CYCLUS TOOLS crank puller | crank inside thread M24x1 - M10x1 bottom bracket connecting thread 720013 - CYCLUS TOOLS tap for internal crank thread M22x1 | for re-cutting 720235 - CYCLUS TOOLS cutter core hole M24 repair thread 720245 - CYCLUS TOOLS tap for internal crank thread M24x1 | for new-cutting 720370 - CYCLUS TOOLS thread guide M8x1 720371 - CYCLUS TOOLS thread guide M15x1 720372 - CYCLUS TOOLS thread guide M12x1 720373 - CYCLUS TOOLS thread guide M10x1 If you have any further questions, please do not hesitate to contact us.