Tool Cyclus Tools facer for crown race 1" 26,4mm (720003)

Cyclus Tools develops and produces top quality tools for professional bicycle repair shops, but of course it’s also appropriated for hobby technicians. Produced in Europe, these durable tools are permanently proofed by our quality checks. With furnitures for your workshop or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools offers solutions. Cyclus Tools counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for today’s fast changing conditions. Create precisely levelled fork cone seats with this face milling tool. the milling cutter is suitable for 1" (26.4 mm) fork cone seats. the width of the cutter surface: 6mm. maximum milling depth is 6 mm. The tool is used for optimal adjustment of the lower fork cone seat on the fork neck. In order to avoid overstressing, a uniform pressure must be applied to the cutter by means of the threaded sleeve and spring. The tool must always be turned in the cutting direction (clockwise) only! Use a cutting oil, suitable for the material to be machined. Note: Before milling, remove any chromium layers that may be present in order to avoid excessive wear of the cutting edges or "seizing" of the tool in the control tube.