Tool Cyclus Tools head tube reamer IS 41,7/2,3/36° (720145)

Cyclus Tools develops and produces top quality tools for professional bicycle repair shops, but of course it’s also appropriated for hobby technicians. Produced in Europe, these durable tools are permanently proofed by our quality checks. With furnitures for your workshop or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools offers solutions. Cyclus Tools counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for today’s fast changing conditions. Cyclus Tools special tool to face IHS head tubes. The head tube reamer creates coaxially exact plane cup seats on the head tube.Diameter: 41.7 mmMilling depth: 2,3 mmAngle: 36°First, remove the conical guide from the spindle.Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring. Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise, while taking the tool out of the head tube. Repeat the above steps to ream the bottom side of the head tube.Before reaming, remove evetually existing chrome plates on the frame, to avoid early abrasion of the reamer. After reaming you might need to remove sharp edges with file. After the use, clean the reamer and keep it in a safe place.