0zł
e-price
Compare
Tension and guide pulley set CeramicSpeed for SRAM 12s AXS Road Coated Alloy 607 red (107486)

Tension and guide pulley set CeramicSpeed for SRAM 12s AXS Road Coated Alloy 607 red (107486)

Product code: CER107486
Ask about a product
close
INQUIRY ABOUT PRODUCT
 
Description - Tension and guide pulley set CeramicSpeed for SRAM 12s AXS Road Coated Alloy 607 red (107486)
The 12-tooth narrow-wide design provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. This product is designed, developed and hand-built in Denmark and offers improved chain friction performance and increased longevity. These pulley wheels are only compatible with the derailleurs and are .CeramicSpeed Standard Ceramic Bearings - low friction, high durabilityBearing race material: hardened-steelCompatible with all ROAD 12-speed SRAM derailleurs: Red AXS, Force AXS, Rival AXS (please note these pulleys are NOT compatible with any XPLR derailleurs!)Pulley material: aluminiumBearing type: 607In the box:Two 12-tooth pulley wheelsAlloy Spacer KitCeramicSpeed Oil for Pulley Wheel Bearings, 15ml. bottleSticker SheetRELATED TECHNICAL INFORMATION:LIFETIME Warranty of CeramicSpeed Coated Bearings - All CeramicSpeed COATED products are covered by a lifetime* warranty! *PLEASE READ WARRANTY TERMS & CONDITIONS here: https://www.ceramicspeed.com/en/cycling/support/warranty-program/lifetime-warranty-terms-and-conditions CeramicSpeed COATED Ceramic Bearings - Like all CeramicSpeed Bearings, our coated products are handbuilt in Denmark. Building a coated bearing adds a number of extra steps to the process. The CeramicSpeed balls and steel races are matched to the micron after which, each set of races is coated. The races are kept together in pairs through the entire process and after coating, each set needs to pass the quality control before they go into production. CeramicSpeed’s coated products offer the ultimate gains in performance and longevity. The unique coating features several attributes that improve the longevity of CeramicSpeed Bearings. The increased hardness of the races, combined with the smoothness of the CeramicSpeed Balls results in virtually no wear on the bearing. The unique coating is a metallic layer that covers the bearing races and makes them 75% harder than steel. Thanks to this, they are highly resistant to corrosion and the coating provides an even lower friction than our standard bearings. Even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible if you choose the coated version.Longetivity comparison diagram: see HEREWithin comprehensive research and development program, the special coating has been developed in cooperation with a European coating specialist. Applied to the bearing’s steel races, through an advanced process that ensures an even, smooth and homogeneous surface, the coating formula improves even further the high quality of CeramicSpeed Bearings.Thanks to the coating’s high resistance to corrosion – even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible. We recommend choosing CeramicSpeed Coated Bearings for unmatched longevity and incredibly low friction.Friction comparison diagram (lower is better): see HEREMaintenance of CeramicSpeed Coated Bearings - Coated Bearings are more resistant to lack of lubrication when it comes to wear and damage on the bearing. Nonetheless, this does not mean that the need for maintenance is completely eliminated.Depending on the riding conditions it is recommended once a year to re-grease your CeramicSpeed Bearings to achieve the best performance in terms of low friction and longevity.If used in very wet or muddy conditions, maintenance might be required more often.If high pressure washer is used, please do not point jet stream to any of bearings (headset, bottom bracket, wheel hub, full suspension links) as it may wash out the grease. The kits come with CeramicSpeed oil in a 15ml dropper bottle. The bearings come with oil in them already. The oil is to keep them running smoothly.
Product Details
Product name
Tension and guide pulley set CeramicSpeed for SRAM 12s AXS Road Coated Alloy 607 red (107486)
Product code
CER107486
Manufacturer
CeramicSpeed
Barcode
5711050072477
Reviews about - Tension and guide pulley set CeramicSpeed for SRAM 12s AXS Road Coated Alloy 607 red (107486)
Write your review

Tension and guide pulley set CeramicSpeed for SRAM 12s AXS Road Coated Alloy 607 red (107486)

Write your review